finned tube造句

• The experimental research of spiral finned tubes
  强化传热螺旋翅片管管束的试验研究
• Experimental research on heat transfer of heat exchanger in finned tube
  翅片管热交换器的传热实验研究
• Marine finned tube heat exchanger
  船用翅片管热交换器
• The design of an automatic prodution line for high frequency welding of spiral fin tube
  高频焊螺旋翅片管生产线自控系统的设计
• Application of genetic algorithm to optimal design of a fin tube heat exchanger
  遗传算法在管箱式翅片管换热器优化设计中的应用
• Electric heater for electrical machine part 2 : ordinary fin tube electric heater
  电机用电加热器.第2部分:普通型翅片管电加热器
• Experimental investigation on heat transfer and pressure drop of pin - shaped - fin tube bank
  针形肋管束的传热特性和阻力特性的试验研究
• Electric heater for electrical machine part 3 : explosion - proof fin tube electric heater
  电机用电加热器.第3部分:防爆型翅片管电加热器
• Investigation on characteristics of pressure drop for binary mixture in horizontal micro - fin tube
  水平微翅管内二元混合制冷剂流动沸腾阻力特性研究
• One of the results is the criterion of flow state in the 3 - d internally crossing - finned tube
  研究结果提供了高pr数流体在肋叉排三维内肋管中的流态判据。
• Experimental study on condensation heat transfer of nonazeotropic refrigerant mixtures outside a bundle of petal shaped fin tube
  混合制冷工质在管束外的冷凝传热强化研究
• Finned tube is used to product various of efficient heat exchanger devices , especially in the remaining heat using area
  翅片管用于制造各种高效率的热交换器，特别在余热利用方面大显神通。
• The finite element solutions of natural frequencies of low - finned tube were obtained in four - constraint mode by simulating work condition of tube in heat exchanger
  采用共振法对低翅片管在上述四种约束模态下的固有频率进行实验测试。
• Based on this model , wall temperature of spiral finned tubes has been computed to verify the validity of the model put forward in the paper
  建立了螺旋肋片管低温再热器的壁温计算数学物理模型，并对螺旋肋片管低温再热器进行了壁温计算。
• A forced convection finned tube exchanger model with constant blast volume was constructed and its reliability was confirmed by the performance test
  摘要建立了恒流条件下的强制对流翅片管式换热器的结霜模型，并用实验结果验证了模型的可靠性。
• Design of the spiral finned tube low temperature reheater has been made by means of applicable investigation of spiral finned tubes , some mathematical - physical models for computing spiral finned tubes wall temperature have been set up
  通过对螺旋肋片管的应用探讨，进行了螺旋肋片管低温再热器的设计。
• The steam flows through two large diameter ducts （ 2000 ） to the condenser . steam enters from this distribution manifold into the finned tubes at the top of the primary condensing bundles
  蒸汽通过1个大孔径管道（ 2000 ）分为两个管道（ 1600 ）流入凝汽器。蒸汽通过配汽集管进入一次冷凝管束顶部的翅片管道。
• The results showed that the total heat transfer coefficient of petal - shaped finned tube oil - cooler with helical baffles was 4 ~ 5 times as large as that of smooth tube oil - cooler with segmental baffles at the same oil pressure drop
  结果表明，在相同油压降下，螺旋隔板花瓣管油冷却器的总传热系数是弓形隔板光滑管油冷却器的4 ~ 5倍。
• In our studies , three - dimensional internally finned tube ( 3 - d ift ) can be used to enhance single - phase forced convective heat transfer inside tube . the new type tube can be called a revolution in heat transfer augmentation
  本文所研究的被称为强化传热革命的三维内肋管就是应用于各种换热器中单相强迫对流换热的新型强化传热管。
• On the basis of that , this paper investigates the saturated temperature of hc600a - oil mixtures , condensation heat transfer and pressure drop characteristics in a horizontal micro - fin tube for it
  在此基础上，对纯天然工质异丁烷( hc600a )与润滑油suniso3gs的混合物饱和温度、水平微肋管内凝结过程的传热及流阻特性进行了实验研究分析。